One of the most important parameters to adjust when slicing a 3D model for printing is the layer height or step height. This is the thickness of each layer that the printer will deposit on top of the previous one, and it affects the quality, speed and strength of the print. I would like to discuss some of the things to consider when setting a step height in a 3D printer slicer.

The first thing to consider is the resolution and detail of your model. If you want to preserve fine details and smooth curves, you will need to use a lower layer height, as this will reduce the visible stair-stepping effect that occurs when printing curved surfaces. However, if your model is simple or has large flat areas, you can use a higher layer height, as this will not affect the appearance much.

The second thing to consider is the printing time and cost. The lower the layer height, the more layers you will need to print, and the longer it will take to finish the print. This also means that your printer will be unavailable for longer. No big deal if you are a hobbyist, but if you have a hourly price associated with your printer it can really increase the cost of your prints. On the other hand, the higher the layer height, the fewer layers you will need to print, and the faster it will finish.

The third thing to consider is the strength and durability of your print. The lower the layer height, the better the adhesion between layers, and the stronger your print will be. This is especially important if you are printing functional parts that need to withstand stress or impact. However, if you are printing decorative or non-functional parts, you can use a higher layer height, as this will not affect the strength much.

There is no single optimal layer height for every print. You will need to balance these factors and choose a layer height that suits your needs and preferences. A good rule of thumb is to start with a layer height that is half of your nozzle diameter, and adjust it up or down depending on your model and desired outcome.

Also, consider “magic numbers.” For most hobbyist FDM printers ideal step heights are in increments of 0.04mm.