If you are looking for a way to give your 3D prints a metallic finish, you might want to try Rub N Buff. Rub N Buff is a wax-based product that comes in various colors and can be applied to any surface with a cloth or a brush.

The first step to use it is to prepare your 3D print. Make sure it is clean and dry, and sand any rough edges or supports. You can also prime your print with a spray paint or an acrylic paint if you want to create a base color or cover any imperfections.

The second step is to choose your Rub N Buff color. There are many options available, from silver and gold to copper and bronze. You can also mix different colors to create custom shades. A little goes a long way, so you only need a small amount of Rub N Buff for each print.

The third step is to apply the Rub N Buff. You can use a soft cloth, a cotton swab, a brush, or even your finger. Rub the product gently on the surface of your print, following the contours and details. You can apply more or less pressure depending on how much coverage you want. You can also layer different colors to create highlights and shadows.

The fourth step is to buff the surface. After applying the Rub N Buff, wait for a few minutes until it dries slightly. Then, use a clean cloth or a paper towel to buff the surface with circular motions. This will remove any excess product and make the surface shine.

The fifth step is to seal the surface. This is optional, but recommended if you want to protect your print from scratches and fingerprints. You can use a spray varnish or a clear coat to seal the surface and add more durability.

That’s it! You have successfully used Rub N Buff for post processing 3D prints. You can experiment with different colors and techniques to create amazing effects. Rub N Buff is a versatile and easy-to-use product that can transform your 3D prints into realistic metal objects.