Sometimes we don’t have the luxury of buying a new 3d printer and have to use what we have. My first choice for printing miniature figurines is my SLA printer. But, before I got it I did use my FDM printer for that same purpose. It took a bit of tuning to get everything just right. In the end, you still don’t get details as fine as on a resin printer, but for a couple of 8 and 10 year old boys who just want to goof off with them, the detail is just fine. Here is how I got my FDM printer tuned to make decent miniature prints.

Use a 0.25 mm nozzle for printing miniatures. This will allow you to print finer features and reduce the visible layer lines. However, a smaller nozzle also means a higher risk of clogging and longer print times. Therefore, you need to buy good quality filament that won’t clog and has consistent diameter and color.

Do your PID tuning. This is a process that calibrates the temperature control of your hotend and bed, ensuring that they maintain a stable and accurate temperature throughout the print. PID tuning can improve the quality and reliability of your prints, as well as prevent thermal runaway and overheating issues.

Make sure that your esteps are calibrated. Esteps are the number of steps your extruder motor takes to push a certain amount of filament through the nozzle. A little tiny nozzle is much more likely to get clogged, so you want to make sure you aren’t feeding it too much filament. To calibrate your esteps, you need to measure how much filament is extruded when you command a certain length, and adjust the estep value accordingly.

If you use Klipper firmware like I do, you need to make sure that you calibrate your rotation distance. This is the distance that the print head moves when the extruder motor rotates one full turn. I think other firmware calls it your steps per mm. Whatever it’s called, make sure that if you print something that’s supposed to be 1 inch, that it’s an inch.

Finally, you need to level your bed at your printing temperature. Then do a mesh bed level. This will compensate for any unevenness or warping of your bed surface, ensuring that your nozzle is at the right distance from the bed at every point. A good bed level is essential for good adhesion and avoiding elephant foot or warping issues.

These are some of the things that I do to print miniatures with my FDM printer. Of course, there are other factors that affect the quality of your prints, such as slicer settings, orientation, supports, infill, post-processing, etc. But I hope this blog post gave you some useful information and inspiration for printing miniatures with FDM.